The APJog utility can be used to slew the mount an exact distance. To use this utility:

1. Click Connect to connect to the driver. If the driver is not already active it will start.

2, Select the Move Distance and Units that you would like the mount to move.

3. Click any of the North/South/East/West buttons to initiate a move.

If you need to stop a slew you can click the STOP button.

Calibrate N/S/E/W: Moves the mount a very short distance in RA and Dec to see if the button directions are reversed on each axis. If a direction is reversed it will be corrected so that autoguiding will perform correctly.