Your Astro-Physics mount's control box has a reticle port that can be used to power an illuminated reticle. The reticle brightness can be controlled by the driver. The Reticle Brightness group box contains controls to adjust the reticle brightness.

Note: When the driver first connects to the mount it will go through a series of commands to ensure that the reticle is at the proper brightness.

ReticleBrightness

Brightness

There are 10 levels of brightness that can be set by moving the slider left or right.

Moving the slider to the right increases output voltage on the control port and thus brightens the reticle.

Moving the slider to the left decreases output voltage on the control port and thus dims the reticle.

Re-Apply

Clicking this button will send a series of commands to ensure that the reticle is at the proper brightness.

 

Astro-Physics AP V2 Driver v5.60.xx